Mts SWIFT 10 ATV Sensor Bedienungsanleitung PDF herunterladen (Seite 87)

Road Simulator

SWIFT 10 ATV Sensors Installing the Transducer

• Slip ring jack screws (2): M5 X 0.5 mm

• Torque wrenches, capable of the following ranges:

19–38 N•m (14–28 lbf•ft)

95 N•m (70 lbf•ft)

Slip ring extension assembly

Four size M12 X 1.75 mm X 30 mm long bolts

• Slip ring assembly fasteners

Four size M8 X 1.25 mm X 20 mm long bolts

• Torque wrenches, capable of the following ranges:

24–74 N•m (18–55 lbf•ft),

203–815 N•m (150-600 lbf•ft);

108–325 N•m (80–240 lbf •ft)

93 N•m (69 lbf•ft)

• Cables (transducer and BNC, plus customer-supplied from transducer

interface to data recorder)

• Tie wraps

• Data recorder

• Power supply–12 V DC or suitable 12 V DC vehicle battery

1. Not all vehicles have alternators to maintain the charge to the vehicle battery

if the battery is also used by the SWIFT sensor and the data acquisition

system. Additional batteries and/or chargers may be necessary.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 143 144

Keine Kommentare

Mts SWIFT 10 ATV Sensor Bedienungsanleitung Seite 87