Mts Series 322 Load Frame Lifting and Moving Bedienungsanleitung

Series 322 Load Frame Lifting and Moving100-286-424 A be certain.

Load Unit Rating 250 kN (55 kip) 271 N·m (200 lbf·ft)Load Unit Rating 500 kN (110 kip) 271 N·m (200 lbf·ft)2. Make sure the crosshead’s lifting eyes a

5. Attach the crosshead assembly to the platen. Tighten the column cap screws to 25% of their full torquevalue.Series 322 Load Frame Shipping Dimensio

DescriptionItemParallel1110 N·m (80 lbf·ft)2Clamp position mark375 N·m (55 lbf·ft)4a) If the lift bracket has been removed, reinstall it, hand tighten

8. Tighten the column cap screws to their full (100%) torque values.Series 322 Load Frame Torque ValuesModel 322.41Model 322.31Model 322.211360 lbf·ft

100-286-424 A

© 2014 MTS Systems Corporation. All rights reserved.Original Instructions (English): 100-286-424 ATrademark InformationMTS, be certain., Bionix, Elast

ContentsLift and Move 5Lifting and Moving the Series 322 Load Frame...

Lift and MoveTopics:•Lifting and Moving the Series 322 Load Frame...

Lifting and Moving the Series 322 Load FramePrerequisitesYou will need the following equipment:• A fork lift or overhead crane capable of lifting the

Unpack and Move the PlatenNote:You can move the platen and crosshead assembly with a forklift as long as they’re attached to theirpallets.Warning:The

DescriptionItemAttach straps130° maximum25. Lift the platen clear of its pallet and move it carefully to its installation site.6. Lower the platen ont

Load Unit Rating 250 kN (55 kip) 271 N·m (200 lbf·ft)Load Unit Rating 500 kN (110 kip) Rear 271 N·m (200 lbf·ft) -RearLoad Unit Rating 500 kN (110 kip