Mts Acumen Electrodynamic Test Area Enclosure Bedienungsanleitung PDF herunterladen (Seite 6)

About Installing Optional Enclosures

The customer must evaluate risks due to ejected parts or materials from the test specimens. If test area guard

is not purchased by the customer, then for protection against ejected parts or materials from test specimens

and to control access to the machinery, the customer must provide a test area guard to protect personnel. If

customer determines a test area guard is not required, the operator must be trained on proper and safe use

before operating the system.

Every MTS Acumen Electrodynamic Test System has an optional test area enclosure. The optional enclosure

is comprised of front, back, and side enclosures and can enclose the test space completely.

Install MTS Acumen Test Area Enclosure

(Right-Hand Opening)

Test Area Enclosure

DescriptionItem

Rear panel assembly1

M6 x 1 mm x 35 mm socket low head screw2

Top bracket3

M6 x 1.00 mm x 12 mm buttonhead cap screw4

M6 x 25MM x 12 mm flathead screw5

Left side panel assembly6

6 MTS Acumen™ Electrodynamic Test System

Test Area Enclosure Installation

1 2 3 4 5 6 7 8 9 10 11 ... 17 18

Keine Kommentare

Mts Acumen Electrodynamic Test Area Enclosure Bedienungsanleitung Seite 6