Mts FlexTest Models 200 Bedienungsanleitung PDF herunterladen (Seite 111)

FlexTest 200 Controller Configuration

MTS FlexTest® Models 40/60/100/200 Controller Hardware FlexTest Controller Configurations

111

Specifications–Model 494.20 Chassis

All equipment related to the controller should be connected to the same fused

power circuit.

Note Electrical connections must be made by qualified personnel and conform

to local codes and regulations. Local electrical codes supersede any

information found here.

Model 494.20 Chassis 24 V DC Output

The Model 494.20 Chassis includes a 24 V DC Output that you can use to power

external devices. The output is fused with a 15 A, 250 V, fast fuse.

Cable specification To maintain EMC compliance, 24 V DC Output cables must comply with the

following specifications:

Connector–4-contact, Amphenol Series 97 connector.

Backshell–EMI metal.

Model 494.20 Chassis Specifications

ARAMETER SPECIFICATION

Input Voltage 100–240 V AC (single phase)

power factor corrected universal input

Input Frequency 50–60 Hz

Input Current 16 A at 100 V AC

8 A at 240 V AC

Facility Power Requirements Provide a dedicated circuit for the

chassis, computer, and monitor.

Input Surge <100 A

Insulation Over Voltage Category I

Pollution Degree 2

Weight Approximately 60 kg (132 lb)

Dimensions Width: 60 cm (24 in)

Height: 98 cm (38 in)

Depth: 90 cm (35 in)

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 343 344

Keine Kommentare

Mts FlexTest Models 200 Bedienungsanleitung Seite 111