Mts Insight Material Testing Systems Bedienungsanleitung PDF herunterladen (Seite 66)

MTS Insight™ Material Testing System

Routine Maintenance Overview Checklist

Maintenance

Routine Maintenance Overview Checklist

Recommended service to be performed at each running time interval noted

Calendar Time using 8 hour Running Time rate per

day

Daily Weekly Annually

Running Time-Hours 8 40 2000

Shunt Cal Check

*Symbol denotes services performed by equipment operators. Most of these procedures involve visual checks

that should not interfere with test system operation. These checks are also completed by trained field service

engineers on each Routine Maintenance visit.

Clean Work Area/Machine Surface X

Verify Limits and E-Stop X

Inspect Cable/Connections X

PC Maintenance

Back-up TestWorks files (*.reg/.cal files)

MTS

†

†Symbol denotes service performed by trained field service engineers as part of an MTS Routine Maintenance

plan. Some of these procedures require special service tools and/or specific service training to complete.

HD Defragmentation MTS

System Inspection

Inspect/Clean Controller MTS

Inspect Drive Belts for Excessive Wear MTS

Inspect Cable Connections MTS

System Checks

Check E-Stop MTS

Check Upper Limit MTS

Check Lower Limit MTS

Check Load Cal/Shunt Cal MTS

Lubrication

Crosshead/Ball Screw (#2 white lithium grease) MTS

Bearings in Base Plate (#2 white lithium grease) MTS

Drivetrain Bearings (if applicable) MTS

Frame and Work Area

Clean/Replace Air Filter MTS

Clean Guide Columns with WD40 (D/G/S Series

Frames)

MTS

Clean Off Frame and Work Area MTS

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 77 78

Keine Kommentare

Mts Insight Material Testing Systems Bedienungsanleitung Seite 66