Mts Multipurpose Elite Bedienungsanleitung PDF herunterladen (Seite 65)

Note:

The controller and configuration file you selected in the previous two steps are used for creating

and running tests using the simulation and this test design guide. When you use other stations

connected to actual systems, you may need to select other controllers or configuration files tailored

to the station that you are working with.

3. On the toolbar, select an access level of Configuration.

4. Enter the password for the Configuration access level. By default, the password is “Configuration”.

5. On the Tools menu, select the Event-Action Editor.

6. On the Define Actions tab, click Digital Output.

7. Click the Add button.

8. Enter the following as necessary:

Turn On Light Properties

ValueProperty

Turn on lightName

SetDigital Output 1

DisabledDigital Output 2

DisabledDigital Output 3

9. Click the Apply button.

10. Click the Add button.

11. Enter the following as necessary:

Turn Off Light Properties

ValueProperty

Turn off lightName

ClearDigital Output 1

DisabledDigital Output 2

DisabledDigital Output 3

12. Click the Apply button, and then close the Event-Action Editor.

13. Return the access level to Operator.

14. On the File menu, select Save Parameters.

15. Minimize the main window of the Station Manager application.

Multipurpose Elite Test Design Guide 65

6.0 Creating Advanced Tests

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 111 112

Keine Kommentare

Mts Multipurpose Elite Bedienungsanleitung Seite 65