Mts Model FlexTest SE Bedienungsanleitung PDF herunterladen (Seite 87)

Model 493.40 I/O Carrier Connections

Models FlexTest® IIm/GT/SE Controller Hardware FlexTest GT Controller Connections

Model 493.40 I/O Carrier Connections

Each Model 493.40 I/O Carrier module can include up to four mezzanine cards.

Each installed mezzanine card is assigned a specific I/O Carrier module front

panel connector (J4–J7 I/O).

A hardware interface file (hwi) defines each type of module (and their associated

mezzanine cards) and maps each module location for the system software. The

.hwi file and the physical locations for each type of module and associated

mezzanine cards must match. Also, the I/O Carrier module address setting (on

the module) must match the .hwi file address. For more information on the .hwi

file, see the MTS 793 Utility Software manual.

• Transducer connections require a conditioner mezzanine card to be installed

in the I/O Carrier module. The following conditioners can be installed:

– Model 493.21B Digital Universal Conditioner

– Model 493.25 Digital Universal Conditioner

– Model 493.47 Encoder

– Model 493.48 Acceleration Conditioner

• Valve connections require a valve driver mezzanine card be installed in the

I/O Carrier module. The following valve drivers can be installed:

– Model 493.14 Valve Driver

– Model 493.15 3-Stage Valve Driver

• Analog I/O connections require an A/D or D/A mezzanine card be installed

in the I/O Carrier module. The following analog mezzanine cards can be

installed:

– Model 493.45 A/D Converter

– Model 493.46 D/A Converter

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 263 264

Keine Kommentare

Mts Model FlexTest SE Bedienungsanleitung Seite 87