Mts TestLine Bedienungsanleitung PDF herunterladen (Seite 52)

3. If necessary, select a project.

It is common practice to keep all files in Project1. If you find this acceptable, at the Select Project

window, select Project1. Otherwise enter your own project name for the project.

Note: The Select Project window will not appear if you selected Project1 as the default project

when you installed the MTS TestSuite application.

4. If necessary, select a controller.

In the Controller Selection window, select the controller for the station that you are using.

Note: This window may not appear in all cases.

5. Select a configuration and parameter set.

Under normal circumstances, you would select a configuration file and parameter set recommended

by the experts in your lab. However, for this example HCF test, select the TrainingConfig.cfg

configuration but do not click OK yet.

52 | MTS TestLine Test System Operation

Running the Example HCF Test

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 131 132

Keine Kommentare

Mts TestLine Bedienungsanleitung Seite 52