Mts TestLine Bedienungsanleitung PDF herunterladen (Seite 79)

A running max/min meter provides the history of sensor extremes that the meter has read since it was

last reset.

4. Set up a Running Max/Min Force Meter.

Use the following parameters:

• Meter Type — Running Max/Min

• Channel — Ch1 (or other depending on your configuration)

• Signal — Force

• Engineering Units — kN

5. Set up a Timed Displacement Meter.

Use the following parameters:

• Meter Type — Timed

• Channel — Ch1 (or other depending on your configuration)

• Signal — Displacement

• Engineering Units — mm

A timed meter provides the current reading of the sensor.

Important: Align the meters as shown in the preceding illustration by clicking the Align button.

You can cycle through the available alignments by clicking multiple times.

6. Set up a Timed Force Meter.

MTS TestLine Test System Operation | 79

Running the Example HCF Test

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 131 132

Keine Kommentare

Mts TestLine Bedienungsanleitung Seite 79